Brabender Plasti-Corders for Sale
We have two Brabender Plasti-Corder Systems for sale. We just received them so we don't even have the photos yet, but can get them if you need them. (1) Used .75" Brabender Plasti-Corder Pelletizing System, Model 200HT .75" Single Screw Extruder, 20:1 L/D Ratio, and Mixing Head Attachment, Model...
Continue readingRegister to Bid Now for Recycling Equipment Auction on Bidspotter
You can register now and look at the complete lot list of equipment from the Former Premises of Wasted Management in Raleigh, NC. Large Post Consumer Plastic Recycling Facility Set-Up in 2003 Including (10) Titech Visionsort Lines, (10) 120-HP Granulators, Eddy Current and Magnetic Separators, Co...
Continue readingUsed Vecoplan/Herbold Shredder & Granulating Line
Item #: 63344 Model: RTR52 SMS60/100 Manufacturer: Vecoplan Used Vecoplan/Herbold Shredder & Granulating Line Consisting of the Following Pieces: -20' Long In-Feed Conveyor, 20' L x 48" Wide, Angled Side Walls, 22" Wide Rubber Belt with 4" Cleats, Controlled by Powerflex 4 Drive in Vecop...
Continue readingArlington in Renewable Energy From Waste Magazine
Arlington is featured in the Supplier News section of the Renewable Energy From Waste Magazine. Currently in their online edition, but soon to be in their print edition. The article discusses Arlington's first foray into the biomass reduction market with the new line of CrushMaster Granulators, Shr...
Continue reading160mm Erema Recycling System, Model RM160, 300hp, 1991 Vintage
Item #: 8294 Model: RM160E Year: 1991 Manufacturer: Erema Description: Used 160mm Erema Recycling System, Model RM160E, 300hp Marathon AC High Efficiency Motor, Danfoss VLT Automation Drive, 1991 Vintage 6000mm x 900mm Wide Belt Conveyor, With AC Drive, 36” x 66” LGI Crossbelt Magnet, Mode...
Continue reading(3) 2.5" Davis Standard Extruders
We just took in (3) 2.5" Davis Standard Extruders Model 25IN25, 24:1 L/D ratio, Air Cooled, 40 HP Check out all of our Davis Standard Equipment.
Continue readingWhat Are the Guidelines to an AMEA Appraisal?
Standards and Procedures of Professional Appraisal Practice as taken from the AMEA website. The Association of Machinery and Equipment Appraisers (AMEA) recognizes the importance of the Uniform Standards of Professional Appraisal Practice (USPAP). All members are required to become familiar with...
Continue reading
54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder
Item #: 7480 Manufacturer: Sterling Size: 54 54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder Description: Used 54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder. 4.5" Sterling Extruder, Water Cooled, 39:1 L/D Ratio, Double Vented Barrel, 8 Barrel Zones, 70" Centerlin...
Continue readingLiquidation of Large Post Consumer Plastic Recycling Facility
Large Post Consumer Plastic Recycling Facility Set-Up in 2003 Including (10) Titech Visionsort Lines, (10) 120-HP Granulators, Eddy Current and Magnetic Separators, Conveyors, Air Compressors and Parts Plant Closed THE FORMER PREMISES OF WASTE MANAGEMENT RECYCLE AMERICA 2200 Atlantic Ave., Raleigh...
Continue reading
Twin Screw Extruders Available
78mm Theysohn Parallel Twin Screw Extruder, 2006 Now Available! Item #: 63327 Model: TTS 78R-26 78MM Theysohn Parallel Twin Screw Extruder, Counter Rotating, Approximately 26:1 L/D Ratio, 73KW(98HP) AC Motor, ABB Drive, 45.3 RPM Screw, 28 KW Heating Capacity, 5 Heating Zones, 3 Co...
Continue reading