Used Vecoplan/Herbold Shredder & Granulating Line
Item #: 63344 Model: RTR52 SMS60/100 Manufacturer: Vecoplan Used Vecoplan/Herbold Shredder & Granulating Line Consisting of the Following Pieces: -20' Long In-Feed Conveyor, 20' L x 48" Wide, Angled Side Walls, 22" Wide Rubber Belt with 4" Cleats, Controlled by Powerflex 4 Drive in Vecop...
Continue readingArlington in Renewable Energy From Waste Magazine
Arlington is featured in the Supplier News section of the Renewable Energy From Waste Magazine. Currently in their online edition, but soon to be in their print edition. The article discusses Arlington's first foray into the biomass reduction market with the new line of CrushMaster Granulators, Shr...
Continue reading160mm Erema Recycling System, Model RM160, 300hp, 1991 Vintage
Item #: 8294 Model: RM160E Year: 1991 Manufacturer: Erema Description: Used 160mm Erema Recycling System, Model RM160E, 300hp Marathon AC High Efficiency Motor, Danfoss VLT Automation Drive, 1991 Vintage 6000mm x 900mm Wide Belt Conveyor, With AC Drive, 36” x 66” LGI Crossbelt Magnet, Mode...
Continue reading(3) 2.5" Davis Standard Extruders
We just took in (3) 2.5" Davis Standard Extruders Model 25IN25, 24:1 L/D ratio, Air Cooled, 40 HP Check out all of our Davis Standard Equipment.
Continue readingWhat Are the Guidelines to an AMEA Appraisal?
Standards and Procedures of Professional Appraisal Practice as taken from the AMEA website. The Association of Machinery and Equipment Appraisers (AMEA) recognizes the importance of the Uniform Standards of Professional Appraisal Practice (USPAP). All members are required to become familiar with...
Continue reading
54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder
Item #: 7480 Manufacturer: Sterling Size: 54 54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder Description: Used 54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder. 4.5" Sterling Extruder, Water Cooled, 39:1 L/D Ratio, Double Vented Barrel, 8 Barrel Zones, 70" Centerlin...
Continue readingLiquidation of Large Post Consumer Plastic Recycling Facility
Large Post Consumer Plastic Recycling Facility Set-Up in 2003 Including (10) Titech Visionsort Lines, (10) 120-HP Granulators, Eddy Current and Magnetic Separators, Conveyors, Air Compressors and Parts Plant Closed THE FORMER PREMISES OF WASTE MANAGEMENT RECYCLE AMERICA 2200 Atlantic Ave., Raleigh...
Continue reading
Twin Screw Extruders Available
78mm Theysohn Parallel Twin Screw Extruder, 2006 Now Available! Item #: 63327 Model: TTS 78R-26 78MM Theysohn Parallel Twin Screw Extruder, Counter Rotating, Approximately 26:1 L/D Ratio, 73KW(98HP) AC Motor, ABB Drive, 45.3 RPM Screw, 28 KW Heating Capacity, 5 Heating Zones, 3 Co...
Continue readingVisit our Shop and Warehouse During Plastec Midwest
Arlington Plastics Machinery's shop and warehouse are located minutes from Schaumburg Convention Center. We are also located in between the Schaumburg Convention Center and O'Hare Airport. Before you make your travel arrangements for Plastec Midwest or any time you are in Chicago, make sure you le...
Continue readingAlan Clarke Named One of Plastics News 2014 Rising Stars
Alan Clarke, Vice President of Arlington Plastics Machinery, was honored as one of Plastics News 2014 Rising Stars. Out of all of the applicants they chose 20 as their noteworthy rising stars. Sustainability, new products, potential draw 'Rising Stars' Spotlight on new talent in the industry
Continue reading