6" Davis Standard Lowboy Extruder
Available for immediate sale. Used 6" Davis Standard Lowboy Extruder, Model 60IN60 , 24:1 L/D Ratio, 17:1 Gearbox Ratio, Water Cooled, 400 HP Reliance DC Motor, Reliance VS Drive, Davis Standard 301 Controller (Discreet Controller Retrofit Available), Approximate Centerline of 28", Screw Cored for...
Continue readingTypical Appraisal Definitions
Following are some typical Appraisal Value Definitions supplied by the Association of Machinery & Equipment Appraisers (AMEA). FORCED LIQUIDATION VALUE (AUCTION) A professional opinion of the estimated most probable price expressed in terms of cash in U.S. dollars which could typically...
Continue readingConsiderations in Buying a Used Desiccant Dryer
Considerations in Buying a Used Desiccant Dryer for Plastic Resin Initial investment, operating cost and production considerations are all factors that affect which desiccant dryer you should purchase. There are several different types of dryers to choose from: desiccant, hot-air, straight compress...
Continue reading
390 ton Toshiba All-Electric Injection Molder, 2007
390 Ton Toshiba All-Electric Injection Molding Machine, Model EC390NIIV30-17AT, 27.5 OZ, 2007 Item #: 63653 Model: EC390NIIV30-17AT Year: 2007 Manufacturer: Toshiba Size: 390 Used 390 Ton Toshiba All-Electric Injection Molding Machine, Model EC390NIIV30-17AT, 2007 Clamp Force...........
Continue reading
Cumberland 50B Granulator
This machine just became available for sale. Used 20" x 50" Cumberland Granulator, Model 50B, 3 Knife Open Rotor, 2 Bed Knives, 150 HP Motor( 172 Amp), Belt Driven, 5/16" Screen Size, Blower Discharge, 18" Cutting Circle, Comes with 10 HP Blower and 48" Diameter Cyclone with Stand, WEG Crusher Dut...
Continue reading1100 Ton Demag Injection Molder, 2004
We just purchased this machine for immediate sale: Used 1100 Ton Demag Van Dorn Injection Molding Machine, Model Caliber 1100, 2004, 160 oz Item #: 63617 Model: Caliber 1100 Year: 2004 Manufacturer: Van Dorn Inj. Molders Size: 1100 Description: Used 1100 Ton Demag Van Dorn Injection Molding Mach...
Continue readingHDPE Wash Line for Sale
2012 Grinding/Wash Line For HDPE Item #: 63648 Year: 2012 Description: 2012 Grinding Wash Line For HDPE Line Includes: Bale Breaker, Conveyer, Trammel Conveyor with Metal Detector with Auto Discharge, Flat Manual Sort Conveyor, Splits to (2) 75 hp Pagani Granulators Model 4090 CHDF, with Auge...
Continue readingWelex and American Kuhne
In 2012, Graham Engineering Corporation purchased a majority interest in American Kuhne and then in 2013 did the same with Welex. They have since moved the Welex production to their New York Facility. American Kuhne will be supplying the extruders to Welex sheet downstream. More info can be foun...
Continue reading5 Used Extruders under $5000
We have the following five extruders available and each is priced at $5000.00 or under. These are incredible bargains for anyone in need of a cheap extruder to get a project going. Sizes are from 1.5" to 4.5" and each one is set at a great price. Follow the links below to see more information, p...
Continue readingPrice Change on Davis Standard Extruder
We just reduced the price on this extruder. We're now only asking $28,500. 100MM Davis Standard Extruder, 26.1 L/D, Air Cooled Barrel Item #: 6219 Model: 35IN35 Year: 2006 Manufacturer: Davis Standard Size: 3.93 Description: Used Davis Standard Extruder, Mark Series, Model 35MV350, 1...
Continue reading