Arlington
Atlanta Plastics Recycling Liquidation
Plastic Recycling Plant Liquidation: Davis/Gala Line, Vecoplan Shredder, Cumberland 50, MGB Guillotine and Much More! Must Move! Make Offer! Item #: 64082 - Used 6" Davis Standard Extruder, Model 60IN60TPIH, 34:1 L/D Ratio, Water Cooled Barrel, Vented, 11.29:1 Gea...
Continue reading
Arlington has highly skilled guys able to load machines of all sizes!
Here is Arlington hard at work loading out a Mitutoyo Coordinate Measuring Machine, Model Crysta-Apex C574 yesterday! Arlington can handle rigging of machines of all sizes.
Continue reading
Plastic Recycling Plant Liquidation
Plastic Recycling Plant Liquidation: Davis/Gala Line, Vecoplan Shredder, Cumberland 50, MGB Guillotine and Much More! Must Move! Make Offer! Item #: 64082 - Used 6" Davis Standard Extruder, Model 60IN60TPIH, 34:1 L/D Ratio, Water Cooled Barrel, Vented, 11.29:1 Gea...
Continue reading
2005 Rapid Shredding/Grinding Line, Manufactured 2005
Item #: 64059 Year: 2005 Manufacturer: Rapid Size: 42 Description: Used 2005 Rapid Shredding/Grinding Line with Metal Detection: 42" Wide Rapid Granumatic Linder Vega Single Shaft Shredder, 25HP, Phumatic Horizontal & Vertical Ram Powered by 20HP Gardner Denver Roots Air Compressor, 11" Diamet...
Continue reading
3 Available!! 18" Conair Up-Cut Saws Model CTS-5, Manufactured 2009
Item #: 8797 Used 18" Conair Up-Cut Saw Model CTS-5, 4" H x 8" Width Profile Capacity, 5" Diameter Pipe Capacity, Carbide Tipped Blade, 3 Hp Saw Motor, Right to Left, Servo Table Travel. Serial Number: 227391 Machine New in 2009 Machine Dimensions: 59" Width x 102" Length Machine Weight: 750 lbs
Continue reading
6" x 24" ESI Accupunch Puller, Cutter, and Precision Air Press Unit Fabrication Unit
Item #: 8512 Model: Accupunch Manufacturer: ESI 6" x 24" ESI Accupunch Puller, Cutter, and Precision Air Press Unit Fabrication Unit, 6" x 24" Belt Contact Shaft Driven with Allen Bradley 2.5kw AC Servo Motor, 7 Ton Pneumatic Platen, 10.5" x 22.5" Platens, 4 Post Design, 10 Diameter Down Cut Saw...
Continue reading
JTW International Plastic Scrap Compactor, Model KP6042
Item #: 8821 Model: KP6042 Manufacturer: JTW International, Inc. Description: JTW International Plastic Scrap Compactor, Model KP6042, 5 HP Ram, 5 Hp Blower, One Heating Zone, Brick Dimensions 6" x 5", Length Control 8"-44" Range. Pneumatic Guillotine Cutter. Used For Loose Flexible Poly Scrap No...
Continue reading
96" Wide Johnson Sheet Line, Installed and Running!
96" Wide Johnson Sheet Line Consisting Of The Following Pieces: 3 HP Conair Vacuum Pump with Dust Collector, Conair Vacuum Received, Misc. Vacuum Pipe. 4.5" Johnson Extruder , 36:1 L/D Ratio, 17.70:1 Lufkin Gearbox Rated To 332 HP, Double Vented And Plugged Barrel, Water Cooled, 42" Centerline H...
Continue reading
500MM Orenda Pulverizing System, Model H1D500
Used Orenda Model H1D500, Single Mill Pulverizing System, 750MM(29.53") Mill Housing, 500MM(19.69") Disk Diameter, Lesson 150 HP Main Motor, 20 Mesh Screen, GE Quick Panel Touch Screen Controls, Soft Start for Main Motor, 2,000 CFM Cooling Cyclone, 8" Rotary Air Lock, Tru-Balance Multi-Deck Sifter,...
Continue readingWhat is Thin Wall Injection Molded Packaging?
Thin wall injection molding is a subset of typical injection molding for mass-producing plastic parts that are thin and light. The design of the machines allow the parts to use as little material as possible and to have high cycle times - creating savings in resin and creating high output of the pr...
Continue reading