Extruders
What can Arlington do for you? When it comes to extruders, Arlington Machinery offers services that go above and beyond the traditional used machinery dealer. The below services are al cart and can be quoted accordingly for each specific machine in stock. These services are designed to h...
Continue reading
Just shipped in last week! 3.5" Davis Standard Single Screw Extruder
3.5" Davis Standard Single Screw Extruder, Model 35IN35V, Water Cooled, 100HP Used 3.5" Davis Standard Single Screw Extruder, Model 35IN35V,Water Cooled, 5 Barrel Zones, 3 Die Zones, Eurotherm Temperature Controls, Pressure Readout, Amp Meter, RPM Gauge100 Hp AC Motor, Allen Bradley Drive, Direct Dr...
Continue reading
REBUILT 80mm Milacron Conical Twin Screw Extruder, NOW AVAILABLE!
Rebuilt 80mm Milacron Conical Twin Screw Extruder, Model CM111, 2017 4 Barrel Heat Zones, 3 Barrel Cooling Zones 75HP Baldor Inverter Duty AC Motor, 2505 RPM, 75HP Yaskawa AC Drive Mosaic Controller Tungsten Barrel and Screws 185 Hours!!!! Call our office at&nbs...
Continue reading
NEW TO INVENTORY!! 4.5" Polytruder Extruder, 36:1 L/D, Water Cooled, 250 Hp AC, Highboy
Used 4.5" Polytruder Extruder, Model 4.5-32-250 36:1 L/D Ratio, Water Cooled, 250 HP Marathon Blue Max AC Motor With ABB ACS800 Drive, Belt Driven To A Flender Gearbox, Gearbox Ratio 17.74, Gearbox Capacity 250 Hp, Non Vented Barrel, 8 Barrel Zones, 8 Die Zones, RKC Temp Controllers, Model CB4...
Continue reading
Four 3.5" Polytruder Extruders for Sale
We have a great offering of 3.5" Polytruder Extruders for Sale at this time. They are all Air Cooled, with 75 Hp motors. We have 24:1 LD and 32:1 LD machines available. Just in and won't last long. For more information:Polytruder Extruders
Continue reading
NOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125
Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...
Continue reading
6" Merritt Extruder available!
6" Merritt Single Screw Extruder, 301 L/D, Water Cooled,500 Hp 6" Merritt Single Screw Extruder, 301 L/D, Water Cooled, Unused 500 Hp AC Motor Priced With NEW Weg AC Drive. 6 Barrel Zones, 3 Die Zones, 182" Barrel Length, Bolt On Style Flange, Amp Readouts Per Zone, Eurotherm Temperature Controls, S...
Continue reading
3/4" Killion Extruder available!
3/4" Killion Extruder, 24:1 L/D, Three Barrel Zones, 1 Die Zone, Rebuilt Gearbox, NEW Temperature Controllers, NEW 2 HP AC Motor And Drive, 44.5" Centerline (Adjustable), Model KLB .075, Does Not Have Screw, S/N 5348F, 240/1/60 Machine Has Been Tested! Approximate Dimensions and Weight: 45" L x 25"...
Continue reading
EXTREMELY Low Hours- 706!!! Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder
Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder, 2014, Extremely Low Hours- 706!!! Parallel Twin Screw Design, 28 L/D, Vented Barrel, 4.5kw Vac Pump, Air Cooled Barrel 4 Cooling Zones,10 Total Temp Zones, 89 KW AC Motor With Direct Drive, Vacon AC Drive, Eisenbeiss Gearbox, 40 RPM Scre...
Continue reading
New to Inventory! 133MM Werner & Pfleiderer Model ZSK133 Co-Rotating Twin Screw Extruder
Used Werner & Pfleiderer Model ZSK133 co-rotating Twin Screw Extruder. Extruder is 35:1 L/D, with vented electrically heated water cooled barrel. Extruder is equipped with Flender gearbox with 1.837:1 gear ratio supplying 15,100 newton meters per shaft. Includes 9 spare new barrel sections, (2)...
Continue reading