AVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer
Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat), 500HP GE Motors DC Motor, 17...
Continue reading
Used 40mm Berstorff/Gala Twin Screw Pelletizing Line available!
Used 40mm Berstorff/Gala Twin Screw Pelletizing Line 43.7mm Barrel Bore Diameter, 37mm Center Distance, 51:1 L/D Ratio,Water Cooled, 8 Barrel Segments, With Vent, Side Port With Screw Feeder, ,110 KW Siemens AC Motor and Drive, Direct Drive To Flender Gear Box, 1,200 Max RPM.530 NM Max Torque Pe...
Continue reading
NOW AVAILABLE!! 4.5" Johnson/Conair Pelletizing Line
4.5" Johnson/Conair Pelletizing Line Line Consists of The Following Pieces: 4.5" Johnson Extruder, 24:1 L/D Ratio, Air-Cooled Barrel, 17.037:1 Gearbox Ratio, Vented and Plugged, Vent Location Approx. 64" From Feed Throat, Cast Aluminum Heaters, 5 Barrel Zones, 5 Die Zones, Melt Temp, 150 HP Reliance...
Continue reading
MUST MOVE!! Make us an OFFER! 160mm Erema Recycling System
160mm Erema Recycling System, Model TVE 160 With Gala Pelletizer 160mm(6.3") Erema Recycling System, Model RGA 160 TVE, S/N: P02/193 Line Consists of the following pieces: Erema RGA160TVE, 230KW(309 HP) Densifier, 72" Diameter Tub, Approximately 30:1 L/D Ratio, Extruder has 370 KW(497 HP) WEG AC M...
Continue reading
Now available! 5 Layer Wayne Blown Film Lab Line
5 Layer Wayne Blown Film Lab Line , 4 Extruders 3 Extruders On Common Base, Each Machine 1" Diameter Barrel, 24:1 L/D Ratio, Air Cooled, 3 Barrel Zones, 5 Die Zones, Each Extruder Has Melt Temp, Amp Meter, and RPM Gauge And Gefran Pressure Readout. 3 HP DC Motors on Each Machine, Pedestal Extrud...
Continue reading
Now Available! 160mm Erema Recycling System, Model TVE 160 With Gala Pelletizer
160mm(6.3") Erema Recycling System, Model RGA 160 TVE, S/N: P02/193 Line Consists of the following pieces: Erema RGA160TVE, 230KW(309 HP) Densifier, 72" Diameter Tub, Approximately 30:1 L/D Ratio, Extruder has 370 KW(497 HP) WEG AC Main Motor With Inverter Drive, 16:1 L/D Ratio, Vented Barrel, Ge...
Continue reading
Recently added to Inventory!! - 2.5" Cincinnati Milacron / Gala Micropellet Line
2.5" Cincinnati Milacron / Gala Micropellet Line Consisting of The Following Pieces 2.5" Cincinnati Milacron Single Screw Extruder, 28:1 L/D Ratio, 75 HP Reliance AC Motor With Reliance GV3000/SE Inverter Drive, 14.52:1 Gearbox Ratio, Air-Cooled Barrel, 4 Barrel Zones, 3 Die Zones, Barrier Scr...
Continue reading