Three Simple Questions for Sizing a Granulator
What Do You Want To Grind? Entire part, portions of a part, or sprue/runners Type of Material Hard/Soft Brittle/Tough Filled/Unfilled Temperature of Parts This helps to determine the rotor design, horsepower, soundproofing and infeed What Size is your Part or Scrap? Physical size...
Continue reading
When do you need to have a soundproofed granulator?
Plastic granulators can come either with soundproofing (sound deadening) panels or without. But when you buy a granulator with soundproofing and what is the real cost of it? If your granulator is in a separate room or is a slow speed granulator, you probably don't need to have soundproofing. If t...
Continue reading
52" Vecoplan Shredder Model RG52-FF, 100 HP, 2006 Vintage
Item #: 8596 Model: RG52-FF Year: 2006 Manufacturer: Vecoplan Size: 52 Description: Used 52" Vecoplan Shredder Model RG52-FF, 84.5 HP, 2006 Vintage, 15" Diameter Rotor, 60 Cutters, Hydraulic Ram, With Control Panel and PLC, With 3 Sets of Screens (1", 2", 3") 115.5 Amp 460/60/3 S/N 8686010
Continue reading200 Ton Toyo Injection Molding Machine, Model SI-200H10, 15.83 OZ, New 2001
Item #: 8597 Model: SI-200H10 Year: 2001 Manufacturer: Toyo Size: 200 Description: Used 200 Ton Toyo Injection Molding Machine, Model SI-200H10, 15.83 OZ, 2001 Vintage Clamp Force...................................................200 ton Barrel Size..................................................
Continue reading1100 Ton Van Dorn Caliber Injection Molding Machine, 265 Oz Shot, New 2002
Item #: 8631 Model: 1100CC-12300 Year: 2002 Manufacturer: Van Dorn Inj. Molders Size: 1100 Description: Used 1100 Ton Van Dorn Caliber Injection Molding Machine, Model 1100CC-12300, 265 Oz Shot, 2002 Vintage Tonnage...................................................1100 tons Screw Diameter..........
Continue reading
Why buy a slow speed granulator?
Arlington offers the complete line of Virtus recycling equipment and one of the questions we often get is, "Why should I buy a slow speed granulator?" Some of the benefits are listed below: You can turn the machine on while loaded. No need to clean out the machine between runs. The direct driv...
Continue reading
2" Davis Standard Thermatic Extruder, Model 20IN20 available! Call for more details!
Item #: 63522 Model: 20IN20 Year: 1999 Manufacturer: Davis Standard Size: 2 Description: Used 2" Davis Standard Thermatic Extruder, Model 20IN20, Air Cooled, 24:1, 40 HP, Powertech Brushless Motor and Drive, 4 Barrel Zones, Air Cooled, Eurothem 2208 Temperature Controls, Belt Driven, 1750 RPM, 19...
Continue reading24" x 56" Ball & Jewell Granulator, Hard Faced Rotor
Item #: 8173 Model: BP2456 Manufacturer: Ball & Jewell Size: 24 Description: Used Ball & Jewell BP2456 Granulator, Hardfaced Five Knife Twin Shear Rotor, 2 Bed Knives, AR400 Rotating End Disks, 150 HP Motor, Furnas Size 4.5 Starter, 12" Air-Veyor Discharge, S/N 78250-06002, Sold As-Is.
Continue readingComing Plastics Caps & Closures Sept. 15-17, visit Arlington Machinery too.
If you coming to the Plastics Caps & Closures Converence in Itasca Sept. 15-17th, you'll be less 10 minutes from our main warehouse and machine shop in Elk Grove Village. It's a great opportunity to see our inventory or to see what kind of services we offer. If you are flying in or out of O'Har...
Continue reading150 Ton Cincinnati Milacron HC150-20Vertical Injection Molding Machine, New 2003
Item #: 8477 Model: HC150-20 Manufacturer: Cincinnati Milacron Size: 150 Description: Used 150 Ton Cincinnati Milacron Vertical Injection Molding Machine, Model HC150-20, Manufactured 2003 Less than 7,000 Hours Tonnage.......................................................150 Shot Size............
Continue reading