Nice machine!! 14" x 56" Cumberland Pull Roll Granulator, 75 HP, New In 2021
Used 14" x 56" Cumberland Pull Roll Granulator Model 14563 Knife Open Rotor, 2 Bed Knives3/8" Screen70" In-Feed Height On Pull Roll Side60" In-Feed Height On Backside With 30" x 12" Feed Slot8" Air-Veyor DischargeS/N 84000-20002Pull Rolls Driven By 3 HP Baldor AC Motor75 HP TECO Westinghouse Motor,...
Continue reading
Now Available! 3,000 CFM Una-Dyn DHD-120 Dryer With (2) 8,000 LB Hoppers
3,000 CFM Una-Dyn DHD-120 Dryer With (2) 8,000 LB Hoppers, New In 201410.4" HMI Touch Screen,-40 Fahrenheit Dew Point350 Degree Fahrenheit Drying Temperature(2) USC-8000 Drying Hoppers, 8,000 LB Capacity, 230 Cubic Foot Capacity, 66" Diameter, Insulated, 10" Inlet/Outlet, Manual Slide Gate Discharge...
Continue reading
Visit us at the Plastics Extrusion World Expo! Booth E943!
Chris and Garrett are at Booth E943 today and tomorrow to help you with your machinery needs! Plastics Extrusion World Expo * Cleveland, OH * November 13-14th * Booth E943 Have Machinery For Sale? Let Us Know!Looking For Machinery? We Will Find It!Want to Kn...
Continue reading
Arlington Machinery has a Large Stock of Positive Displacement Vacuum Pumps!
Arlington Machinery has a large stock of positive displacement vacuum pumps. These pumps are used to convey long-distance material. Many of these pumps have been tested, videoed and in excellent condition! Vacuum Pumps are ready to ship and less than half the cost of a new pump! Check them out now!!...
Continue reading
600 Ton Krauss Maffei Model KM600-3500 C3, Injection Molding Machine, 2007
600 Ton Krauss Maffei Model KM600-3500 C3, Injection Molding Machine, 49.5 oz 2007Injection Unit............SP3500Screw Size...............80mmPlanten....................1510x1370mmClear Width..............1000x930Mold Open Stroke.....1150mmDaylight...................1750mmShot Weight.............14...
Continue reading
WATCH THIS VIDEO! Brown Machine Model CS-5500 Thermoformer
Used Brown Machine Model CS-5500 Thermoformer, S/N 15122 (2007, Upgraded 2023) 86,751 Hours, Upgraded Servo Drive Systems, Yaskawa 7 Drives, Full Oven Rebuild, 50" x 50" Max Mold Size, 260 Ton Holding Force, 180 Ton Coining Force, 7"-10" Depth of Draw, 100 PSI Forming Pressure, 53" Sheet Width, Oven...
Continue reading
MUST SEE! 600mm(23.6") Wide Lab Tech Cast Film Line!
600mm(23.6") Wide Lab Tech Cast Film Line, Model LCCR-600 Chill Roll, 40mm Extruder, New in 2022 -40mm Diameter Lab Tech Single Screw Extruder, Model LE40-3030:1 L/D Air Cooled Barrel22kw Direct Drive Motor, With 10:1 Gearbox Ratio, 200 Max Screw RPM,Extruder Mounted on Adjustable Pedestal-600mm Wid...
Continue reading
Wow! Take a look! Brown Model CS-5500 Quad Series Continuous Thermoformer
Used Brown Model CS-5500 Quad Series Continuous Thermoformer, S/N 155772011 (upgraded 2023) 66,386 Hours with Upgraded Servo Drive System,Kinetix 7000 Drives, Lower Oven Rebuild,50" x 50" Max. Mold Size,260 Ton Holding Force,180 Ton Coining Force, 7"-10" Depth Draw,100 PSI Forming Pressure,53" Sheet...
Continue reading
54" Wide Davis Standard 3-Layer Sheet Extrusion Line Available!!
Used 54" Wide Davis Standard 3-Layer Sheet Extrusion Line4 1/2" Davis Standard Model 45T (450) Thermatic Extruder, 32:1 LD Ratio, Water Cooled, 250HP Motor, S/N 002156214-1-1, 2019Nordson Screen Changer3 1/2" Davis Standard Model 35 Thermatic Extruder, 24:1 LD Ratio, Water Cooled, Approx 150 HP Moto...
Continue reading