Arlington Machinery has a Large Stock of Positive Displacement Vacuum Pumps!
Arlington Machinery has a large stock of positive displacement vacuum pumps. These pumps are used to convey long-distance material. Many of these pumps have been tested, videoed and in excellent condition! Vacuum Pumps are ready to ship and less than half the cost of a new pump! Check them out now!!...
Continue reading
600 Ton Krauss Maffei Model KM600-3500 C3, Injection Molding Machine, 2007
600 Ton Krauss Maffei Model KM600-3500 C3, Injection Molding Machine, 49.5 oz 2007Injection Unit............SP3500Screw Size...............80mmPlanten....................1510x1370mmClear Width..............1000x930Mold Open Stroke.....1150mmDaylight...................1750mmShot Weight.............14...
Continue reading
WATCH THIS VIDEO! Brown Machine Model CS-5500 Thermoformer
Used Brown Machine Model CS-5500 Thermoformer, S/N 15122 (2007, Upgraded 2023) 86,751 Hours, Upgraded Servo Drive Systems, Yaskawa 7 Drives, Full Oven Rebuild, 50" x 50" Max Mold Size, 260 Ton Holding Force, 180 Ton Coining Force, 7"-10" Depth of Draw, 100 PSI Forming Pressure, 53" Sheet Width, Oven...
Continue reading
MUST SEE! 600mm(23.6") Wide Lab Tech Cast Film Line!
600mm(23.6") Wide Lab Tech Cast Film Line, Model LCCR-600 Chill Roll, 40mm Extruder, New in 2022 -40mm Diameter Lab Tech Single Screw Extruder, Model LE40-3030:1 L/D Air Cooled Barrel22kw Direct Drive Motor, With 10:1 Gearbox Ratio, 200 Max Screw RPM,Extruder Mounted on Adjustable Pedestal-600mm Wid...
Continue reading
Wow! Take a look! Brown Model CS-5500 Quad Series Continuous Thermoformer
Used Brown Model CS-5500 Quad Series Continuous Thermoformer, S/N 155772011 (upgraded 2023) 66,386 Hours with Upgraded Servo Drive System,Kinetix 7000 Drives, Lower Oven Rebuild,50" x 50" Max. Mold Size,260 Ton Holding Force,180 Ton Coining Force, 7"-10" Depth Draw,100 PSI Forming Pressure,53" Sheet...
Continue reading
54" Wide Davis Standard 3-Layer Sheet Extrusion Line Available!!
Used 54" Wide Davis Standard 3-Layer Sheet Extrusion Line4 1/2" Davis Standard Model 45T (450) Thermatic Extruder, 32:1 LD Ratio, Water Cooled, 250HP Motor, S/N 002156214-1-1, 2019Nordson Screen Changer3 1/2" Davis Standard Model 35 Thermatic Extruder, 24:1 LD Ratio, Water Cooled, Approx 150 HP Moto...
Continue reading
NICE MACHINE! Wont last long! 20" x 36" Rapid 500-90 Granulator, 100 HP
Used 20" x 36" Rapid 500-90 Granulator, 100 HP3 Knife Open Rotor, 2 Bed Knives100 HP Motor460/3/60, 133 FLAStarter Panel With Starter For Main Motor And Starter For BlowerIncludes Blower, Cyclone, And Dust Collection SystemNew In 2009S/N 380160 Need more info? Give us a call at 847-956-7300 or...
Continue reading
TESTED AND RUNNING! 13" Wide Kobelco Stewart Bolling 2 Roll Mill
Used 13" Wide Kobelco Stewart Bolling 2 Roll Mill 6" Diameter RollsDriven By 7.5 HP AC Motor Through 55.55:1 SEW GearboxAC Inverter Drive460/3/60S/N 14557Includes Delta T Hot Oil Temperature Controller, Model T1221M, 460/3/60, S/N 16613Approximate Dimensions:Mill: 54" L x 42" W x 60" HTCU: 30" L x 2...
Continue reading