54" Wide Davis Standard 3-Layer Sheet Extrusion Line Available!!
Used 54" Wide Davis Standard 3-Layer Sheet Extrusion Line4 1/2" Davis Standard Model 45T (450) Thermatic Extruder, 32:1 LD Ratio, Water Cooled, 250HP Motor, S/N 002156214-1-1, 2019Nordson Screen Changer3 1/2" Davis Standard Model 35 Thermatic Extruder, 24:1 LD Ratio, Water Cooled, Approx 150 HP Moto...
Continue reading
NICE CLEAN MACHINE! 3" Davis Standard Extruder - VIDEO AVAILABLE!
3" Davis Standard Extruder, 24:1 L/D Ratio Air-Cooled Barrel, 4 Barrel Zones, 6 Downstream ZonesBelt Driven Through 17.26:a Gearbox, Rated To 75 HPMarathon Blue Max Motor With Allen-Bradley Impact 1336 AC Inverter DriveBolt On Die, Includes Die Head Setup For NozzleIncludes Screw & Hop...
Continue reading
NEW TO INVENTORY!! 4.5" Davis Standard Super Blue Extruder, Model SB450
Used 4.5" Davis Standard Super Blue Extruder, Model SB450 24:1 L/D Ratio17.39:1 Gearbox Ratio, Gearbox Rated To 400 HP2:1 Belt Ratio, NEW Drive PulleyNEW BeltsRebuilt 200 HP Baldor 1780 RPM AC MotorUnused Yaskawa AC Inverter DriveAir-Cooled Barrel, 5 Zones, 8 Downstream ZonesNEW Novus Te...
Continue reading
* SOLD! * NEVER USED! 6" Davis Standard Extruder, New in 2019
UNUSED Davis Standard Thermatic 60T Extruder 34:1 L/D, Grooved Feedthroat (38:1 Effective L/D Per D/S) 21:1 Gearbox Ratio, Rated To 1050 HP 7 Barrel Zones, Air-Cooled...
Continue reading
Nearly Finished! 6" Davis Standard Extruder available
Used 6" Davis Standard Extruder, 30:1 L/D, 500 HP AC Motor, Vented BarrelVent Located Approx. 103" From Center Of Feed Throat17.21:1 Gearbox Ratio, Gearbox Rebuilt, NEW Bearings With Exception of Thrust Bearing, Rated For 522 HP With 1.5 SF.Air Cooled Barrel, 8 Barrel Zones, 4 Downstream Zones, Call...
Continue reading
AVAILABLE NOW! 4.5" Davis Standard Extruder with Screen Changer, Melt Pump And Die
Used 4.5" Davis Standard Extruder Model 45IN45HT, 40:1 L/D Ratio, With Screen Changer, Melt Pump And Die * VIDEO AVAILABLE! * Double Vented Extruder, First Vent 88" From Feed, Second Vent 133" From Feed, 17.491" Gearbox Ratio, 300 Hp AC Motor With Powerflex Drive, Controlled...
Continue reading
LOOK at this!! 6" Davis Standard Extruder, New in 2012 - LOW HOURS!
6" Davis Standard Extruder, 30:1 L/D, Air Cooled, 600 HP New In 2012 LOW HOURS! 180" EDI Magnum Sheet Die .5" Lip Opening
Continue reading
Looking for an Extruder? Check out this 4.5" Davis Standard Super Blue Extruder!
Used 4.5" Davis Standard Super Blue Extruder, Model SB450 Air-Cooled Barrel, 5 Zones200 HP Reliance 1760 RPM AC Motor With Yaskawa CIMR-F7U4110 AC Inverter Drive (Keypad May Need To Be Replaced)17.39:1 Gearbox Ratio, Rated To 400 HPControl Panel With Eurotherm 3208 Temperature Controllers 5 Bar...
Continue reading