LOOK at this!! 6" Davis Standard Extruder, New in 2012 - LOW HOURS!
6" Davis Standard Extruder, 30:1 L/D, Air Cooled, 600 HP New In 2012 LOW HOURS! 180" EDI Magnum Sheet Die .5" Lip Opening
Continue reading
Looking for an Extruder? Check out this 4.5" Davis Standard Super Blue Extruder!
Used 4.5" Davis Standard Super Blue Extruder, Model SB450 Air-Cooled Barrel, 5 Zones200 HP Reliance 1760 RPM AC Motor With Yaskawa CIMR-F7U4110 AC Inverter Drive (Keypad May Need To Be Replaced)17.39:1 Gearbox Ratio, Rated To 400 HPControl Panel With Eurotherm 3208 Temperature Controllers 5 Bar...
Continue reading
4.5" Davis Standard Extruder for Sale! -Nice machine! Won't last long!
Used 4.5" Davis Standard Super Blue Extruder, Model SB450 24:1 L/D Ratio17.39:1 Gearbox Ratio, Gearbox Rated to 400 HPAir Cooled Barrel, 5 Barrel Zones, 6 Die ZonesControl Panel With Eurotherm 3208 Temperature Controllers, Tachometer, Amp Gauge, Gefran 40TB Pressure Readout, Solid State Relays,...
Continue reading
NICE CLEAN MACHINE!!
Used 2.5" Davis Standard Mark 6 Extruder, Model 25MK6, 24:1 L/D, Air Cooled, 4 Barrel Zones, 1 Clamp and 1 Die Zone, Controlled By Eurotherm 2208E temperature Controllers, Individual Amp Gauges for Each Zone and Pressure, Load, RPM, Readouts, 4 - 7000 Watt Heater Bands, 40 HP A/C Motor, Control Tech...
Continue reading
Profile Equipment and 3D Filament Plant Available!
3D Filament Plant for Sale-New 2015 -MUST MOVE-CALL NOW(4) 40mm GS Machinery Extrusion Lines130 ton Injection Molding Machine WITH Spool mold Dri Air Dryers, Chillers, Etc. For more information the 3D Filament plant, please contact Alan Clarke, 224-875-3714, alan@arlingtonmachinery.com ___...
Continue reading
Just shipped in last week! 3.5" Davis Standard Single Screw Extruder
3.5" Davis Standard Single Screw Extruder, Model 35IN35V, Water Cooled, 100HP Used 3.5" Davis Standard Single Screw Extruder, Model 35IN35V,Water Cooled, 5 Barrel Zones, 3 Die Zones, Eurotherm Temperature Controls, Pressure Readout, Amp Meter, RPM Gauge100 Hp AC Motor, Allen Bradley Drive, Direct Dr...
Continue reading
NOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125
Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...
Continue reading
AVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer
Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat), 500HP GE Motors DC Motor, 17...
Continue reading
LOOK! New to Inventory! 1.5" Davis Standard Pedestal Extruder
1.5" Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. Temperature Control Panel With NEW Eurotherm 3205 Temperature Controll...
Continue reading
Recycling Plant Closure, All Equipment SOLD!
Recycling Plant Closure, All Equipment SOLD! 13670B - 6" Davis Standard Extruder, 38:1 LD 600 Hp Pelletizing Line 13634B - Cal Sierra Dual Densification System 13737B - 52" Vecoplan RG52 Single Shaft Shredder 13738B - 52" Vecoplan RG52 Single Shaft Shredder 13727B - Unused Herbold Model MTM508...
Continue reading