NICE CLEAN MACHINE!!
Used 2.5" Davis Standard Mark 6 Extruder, Model 25MK6, 24:1 L/D, Air Cooled, 4 Barrel Zones, 1 Clamp and 1 Die Zone, Controlled By Eurotherm 2208E temperature Controllers, Individual Amp Gauges for Each Zone and Pressure, Load, RPM, Readouts, 4 - 7000 Watt Heater Bands, 40 HP A/C Motor, Control Tech...
Continue readingREBUILT 80mm Milacron Conical Twin Screw Extruder, NOW AVAILABLE!
Rebuilt 80mm Milacron Conical Twin Screw Extruder, Model CM111, 2017 4 Barrel Heat Zones, 3 Barrel Cooling Zones 75HP Baldor Inverter Duty AC Motor, 2505 RPM, 75HP Yaskawa AC Drive Mosaic Controller Tungsten Barrel and Screws 185 Hours!!!! Call our office at&nbs...
Continue readingNEW TO INVENTORY!! 4.5" Polytruder Extruder, 36:1 L/D, Water Cooled, 250 Hp AC, Highboy
Used 4.5" Polytruder Extruder, Model 4.5-32-250 36:1 L/D Ratio, Water Cooled, 250 HP Marathon Blue Max AC Motor With ABB ACS800 Drive, Belt Driven To A Flender Gearbox, Gearbox Ratio 17.74, Gearbox Capacity 250 Hp, Non Vented Barrel, 8 Barrel Zones, 8 Die Zones, RKC Temp Controllers, Model CB4...
Continue readingNeed a machine to go to a facility overseas? No problem!
Last Friday we loaded a crated Extruder into a container going to China! Arlington accommodates our customers needs and will assist you in getting a machine anywhere in the world! From the purchase, customs paperwork, crating, to loading safely into a co...
Continue readingNOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125
Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...
Continue readingAVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer
Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat), 500HP GE Motors DC Motor, 17...
Continue reading6" Merritt Extruder available!
6" Merritt Single Screw Extruder, 301 L/D, Water Cooled,500 Hp 6" Merritt Single Screw Extruder, 301 L/D, Water Cooled, Unused 500 Hp AC Motor Priced With NEW Weg AC Drive. 6 Barrel Zones, 3 Die Zones, 182" Barrel Length, Bolt On Style Flange, Amp Readouts Per Zone, Eurotherm Temperature Controls, S...
Continue readingNOW AVAILABLE! 18mm Leistritz Micro Model 18GL35D Twin Screw Extruder
18mm Leistritz Micro Model 18GL35D Twin Screw Extruder, 2.4 Kw (3.2Hp ) 7 Barrel Sections, Water Cooled, 9 Eurotherm Temperature Controllers, Solid State Relays, Dynisco Pressure Transducer With Readout, RPM Gauge, Melt Temp,529 Screw Output RPM, Comes With 1.75" Diameter Paddle Style Material Fee...
Continue readingUsed 40mm Berstorff/Gala Twin Screw Pelletizing Line available!
Used 40mm Berstorff/Gala Twin Screw Pelletizing Line 43.7mm Barrel Bore Diameter, 37mm Center Distance, 51:1 L/D Ratio,Water Cooled, 8 Barrel Segments, With Vent, Side Port With Screw Feeder, ,110 KW Siemens AC Motor and Drive, Direct Drive To Flender Gear Box, 1,200 Max RPM.530 NM Max Torque Pe...
Continue reading3/4" Killion Extruder available!
3/4" Killion Extruder, 24:1 L/D, Three Barrel Zones, 1 Die Zone, Rebuilt Gearbox, NEW Temperature Controllers, NEW 2 HP AC Motor And Drive, 44.5" Centerline (Adjustable), Model KLB .075, Does Not Have Screw, S/N 5348F, 240/1/60 Machine Has Been Tested! Approximate Dimensions and Weight: 45" L x 25"...
Continue reading