EXTREMELY Low Hours- 706!!! Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder
Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder, 2014, Extremely Low Hours- 706!!! Parallel Twin Screw Design, 28 L/D, Vented Barrel, 4.5kw Vac Pump, Air Cooled Barrel 4 Cooling Zones,10 Total Temp Zones, 89 KW AC Motor With Direct Drive, Vacon AC Drive, Eisenbeiss Gearbox, 40 RPM Scre...
Continue readingNew to Inventory! 133MM Werner & Pfleiderer Model ZSK133 Co-Rotating Twin Screw Extruder
Used Werner & Pfleiderer Model ZSK133 co-rotating Twin Screw Extruder. Extruder is 35:1 L/D, with vented electrically heated water cooled barrel. Extruder is equipped with Flender gearbox with 1.837:1 gear ratio supplying 15,100 newton meters per shaft. Includes 9 spare new barrel sections, (2)...
Continue readingLOOK! New to Inventory! 1.5" Davis Standard Pedestal Extruder
1.5" Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. Temperature Control Panel With NEW Eurotherm 3205 Temperature Controll...
Continue readingNOW AVAILABLE!! 4.5" Johnson/Conair Pelletizing Line
4.5" Johnson/Conair Pelletizing Line Line Consists of The Following Pieces: 4.5" Johnson Extruder, 24:1 L/D Ratio, Air-Cooled Barrel, 17.037:1 Gearbox Ratio, Vented and Plugged, Vent Location Approx. 64" From Feed Throat, Cast Aluminum Heaters, 5 Barrel Zones, 5 Die Zones, Melt Temp, 150 HP Reliance...
Continue readingRecycling Plant Closure, All Equipment SOLD!
Recycling Plant Closure, All Equipment SOLD! 13670B - 6" Davis Standard Extruder, 38:1 LD 600 Hp Pelletizing Line 13634B - Cal Sierra Dual Densification System 13737B - 52" Vecoplan RG52 Single Shaft Shredder 13738B - 52" Vecoplan RG52 Single Shaft Shredder 13727B - Unused Herbold Model MTM508...
Continue readingAvailable Now! Used 80" Wide Sterling Sheet Line With 6" Extruder 400 HP
Used 80" Wide Sterling Sheet Line with 6" Extruder 400 HP: 6" Sterling Extruder, Air Cooled,30:1 L/D, Vented, , 400 HP DC Motor & Emerson Drive, 72" Center-Line With 7 Barrel Zone Control Panel 6" Beringer Slide Plate Screen Changer with Hydraulic Pack 30 HP Melt Pump 54" Wide Sheet Die Mo...
Continue readingUsed 78" Wide American Kuhne Sheet Line with 6" Single Screw Extruder avaiable!
Now available! Call now to request a quote! Used 78" Wide American Kuhne Sheet Line with 6" Single Screw Extruder, 500HP, Manufactured 2001 Line Consisting Of:-6" American Kuhne Single Screw Extruder, Model AK 600 A/C Ext, Grooved Feed Throat, 30:1 L/D, Air Cooled, 500HP Reliance Motor, Reliance F...
Continue reading3" Davis Standard Extruder, Model MVIN25H-Available Now!
Cleaned, Painted, Tested and New Drive - Ready to find a new home! 3" Davis Standard Extruder, Model MV30IN25H, 24:1 L/D,17.26:1 Gear Box Ratio, 42" Centerline, SO Number 58576, S/N U8886, Gearbox Rated to 112 HP,100 RPM Screw Speed, Clamp, 40 HP AC Motor and NEW Control Techniques Drive, Solid S...
Continue readingNew to inventory!! 1.5" Davis Standard Pedestal Extruder, Model HPE-150A
1.5" Davis Standard Pedestal Extruder, Model HPE-150A, 24:1 L/D,Air Cooled,15 Hp AC Motor, Marathon Black Max, 1760 RPM With Yaskawa F7 AC Drive, 4 Barrel Zones, 5 Die Zones, Dynisco Pressure Transducer, Amp Meter, Rpm Gauge, With Clamp, Hopper and Screw, On Casters Machine Currently Set Up For 23...
Continue reading4.5" Welex Extruder Available!
4.5" Welex Extruder, 36:1 L/D, Water Cooled, Vented at 112" From Feed Section, Eurothem Temperature Controls, 6 Barrel Zones, 4 Die Zones, Melt Temp, Pressure Readout, Amp Meters Per Zone, 250 Hp DC, Direct Drive, (2500 RPM) 4.5" Slide Plate Screen Changer and 7.5 Hp Power Pac...
Continue reading