6" Merritt Extruder available!
6" Merritt Single Screw Extruder, 301 L/D, Water Cooled,500 Hp 6" Merritt Single Screw Extruder, 301 L/D, Water Cooled, Unused 500 Hp AC Motor Priced With NEW Weg AC Drive. 6 Barrel Zones, 3 Die Zones, 182" Barrel Length, Bolt On Style Flange, Amp Readouts Per Zone, Eurotherm Temperature Controls, S...
Continue reading
NOW AVAILABLE! 18mm Leistritz Micro Model 18GL35D Twin Screw Extruder
18mm Leistritz Micro Model 18GL35D Twin Screw Extruder, 2.4 Kw (3.2Hp ) 7 Barrel Sections, Water Cooled, 9 Eurotherm Temperature Controllers, Solid State Relays, Dynisco Pressure Transducer With Readout, RPM Gauge, Melt Temp,529 Screw Output RPM, Comes With 1.75" Diameter Paddle Style Material Fee...
Continue reading
3/4" Killion Extruder available!
3/4" Killion Extruder, 24:1 L/D, Three Barrel Zones, 1 Die Zone, Rebuilt Gearbox, NEW Temperature Controllers, NEW 2 HP AC Motor And Drive, 44.5" Centerline (Adjustable), Model KLB .075, Does Not Have Screw, S/N 5348F, 240/1/60 Machine Has Been Tested! Approximate Dimensions and Weight: 45" L x 25"...
Continue reading
EXTREMELY Low Hours- 706!!! Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder
Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder, 2014, Extremely Low Hours- 706!!! Parallel Twin Screw Design, 28 L/D, Vented Barrel, 4.5kw Vac Pump, Air Cooled Barrel 4 Cooling Zones,10 Total Temp Zones, 89 KW AC Motor With Direct Drive, Vacon AC Drive, Eisenbeiss Gearbox, 40 RPM Scre...
Continue reading
LOOK! New to Inventory! 1.5" Davis Standard Pedestal Extruder
1.5" Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. Temperature Control Panel With NEW Eurotherm 3205 Temperature Controll...
Continue reading
Now available! 5 Layer Wayne Blown Film Lab Line
5 Layer Wayne Blown Film Lab Line , 4 Extruders 3 Extruders On Common Base, Each Machine 1" Diameter Barrel, 24:1 L/D Ratio, Air Cooled, 3 Barrel Zones, 5 Die Zones, Each Extruder Has Melt Temp, Amp Meter, and RPM Gauge And Gefran Pressure Readout. 3 HP DC Motors on Each Machine, Pedestal Extrud...
Continue reading
New to inventory!! 3.5" Davis Standard Extruder, Model DS3.5, 24:1, 60 Hp
Used 3.5" Davis Standard Extruder, Model DS3.5, 24:1, 60 Hp Air Cooled, 4 Barrel Zones, 3 Die Zones, Eurotherm Controls, Dynisco Pressure Readout, Spectrum Drive, Belt Driven To Gearbox 17.03:1 Ratio, 60 Hp Capacity With 1.25 S.F. 42" Centerline Height With Barrel ClampS/N L8713, Machine New in 1...
Continue reading